Coal Paint

An ultra high temperature paint specially formulated for applying a decorative finish to new or for rejuvenating old ceramic coals used in gas fires. Coal Paint is colour fast up to 650° C and is touch dry in 2-3 hours at room temperature.

Directions for use

• Allow fire to cool before carefully removing coals.
• Remove loose paint, dust and debris with a brush and ensure surfaces are dry before commencing painting.
• Spread out coals onto an old newspaper.
• Before spraying, shake can vigorously for one minute, and again between Bursts.
• Spray thinly, two thin coats are more effective than one thick coat.
• Allow 2-3 hours to dry between coats.
• After use, invert can and spray for a few seconds to clear nozzle.
• Allow at least 24 hours before re lighting the fire.
• If painting is performed in situ, carefully mask over the pilot light assembly and any surrounding fitments and carpets that do not require painting.  Cover any furnishings and carpets.
• Occasional highlights may appear on the renovated matt coals this is perfectly normal and enhances their appearance.